Products comparison

You have of all 8 possible products to compare.

Compare it now

Getting started with TRÅDFRI smart blinds


Getting started

How do I install the blind?  [+] Answer
Do I need an electrician to install the motorised blinds?  [+] Answer

No, the blinds come together with a rechargeable battery, so no need to wire into the mains electricity.
How do the wireless blinds operate?  [+] Answer

You can operate the blinds with the included remote control or with the IKEA Home smart app (available to install on iOS or Android), via the TRÅDFRI gateway (sold separately). A single remote control (once paired) or the IKEA Home smart app can also operate multiple blinds. If the battery runs out and you need to pull the blind, you can carefully pull it down by hand.
How do I pair the blinds with the included remote control?  [+] Answer

Each individual blind is already paired. Follow these steps to pair additional blinds.

1. Open the back cover of the open/close remote and find the pairing button.
2. Short press on both buttons on the blind. The device is now awake and ready to pair for 2 minutes.
3. Hold the open/close remote very close to the wireless roller blind that you want to add (no more than 5cm away from the blinds' battery lid).
4. Press and hold the pairing button for at least 10 seconds on the wireless open/close remote.
5. A red light will shine steadily on the open/close remote. On your wireless roller blind, a white light will begin to dim and flash until the devices are paired successfully.
How do I unpair the blinds?  [+] Answer

Follow the same procedure as pairing the blinds.
Can I pair the same remote control to several FYRTUR or KADRILJ roller blinds? [+] Answer

Yes, just follow the same process to pair one blind. You can pair up to 4 blinds. Please note that, if you have more than one blind, they might go up and down at slightly different speeds but this is normal.
Where do I find the pairing button on my remote control?  [+] Answer

The pairing button is inside the remote control.
How do I connect my blinds to the IKEA Home smart app?  [+] Answer

You need the TRÅDFRI gateway to use the IKEA Home smart app. Download the app for free via Google Play or App Store, depending on which mobile device you have. Information on how to pair and add blinds can be found in the IKEA Home smart app.

Download the IKEA Home smart app for iOS

Download the IKEA Home smart app for Android

How to use

How should I operate the blind with the remote?  [+] Answer

For one short press on the remote – the blind will go up or down continuously. Press once to stop. Try not to double click or click the remote repeatedly, as this can create multiple signals/commands to the blind.
How do I reset the remote control to the factory settings?  [+] Answer

Press the pairing button on the remote control 4 times.

Can I attach the remote control to my wall?  [+] Answer

Yes, you can attach it using the sticky pads on the remote control holder. Alternatively, you can attach the holder with screws.
How do I set the maximum drop on the blinds?  [+] Answer

Move the blinds to the desired position using the remote control or buttons on the blind. When the blind is in the desired position, you can double press the up or down button on the blind to save this position as the new maximum level of extension.

Can I operate my blinds via voice control steering?  [+] Answer

Yes, please see the product information page for more information.
From what distance can I control the blinds?  [+] Answer

The remote control can steer the blinds from a distance of 10 metres. Using the TRÅDFRI gateway and IKEA Home smart app, you can control the blinds from anywhere as long as you are connected to the same WiFi as the gateway. Some app/HomeKit suppliers offer steering away from home.
Can the blinds be steered with a timer?  [+] Answer

Yes, via the IKEA Home smart app.
How do I factory reset the blinds?  [+] Answer

On the blind, press both buttons together for more than 5 seconds.


Back to top